POWDER COAT PANAMA - POWDER COATING . MEDIA BLASTING . RESTORATION . PANAMA

Posts

Showing posts from January 2, 2011

Italian Kitchen Levers Restoration

These levers where completely restored for an Italian kitchen in Punta Paitilla. After some serious prep work they finished off in High Gloss Black and are sure to last a lifetime.

Polaris front End and Floor Boards

Detailing Center is know to be Panama's premier place to get you car detailing done right, and their clients are known to be very demanding. When it came time for them to do parts for Polaris off road vehicle which was destined to be operated mainly on the beach, they came to us for the ultimate quality finish - zinc primer powder with a low gloss black coat on top... this is the final product all packed up and ready for instalation.

Sportster Foot Controls Restoration

The request form Urraca Kustoms was to restore these used controls - the idea was to make them look brand new... Our client was very pleased with the Low Gloss Black finish.

Custom Tail lamp

This mini tail lamp for HD came in from the manufacturer in raw aluminum - we coated the lamp in a Low Gloss Black finish for a Sportster 48 Custom being built at Urraca Kustoms... unique and flawless.

Custom Exhaust for Harley Davidson

These custom pipes where coated on High-Tem powder for Panama Chop. Our High-Temp satin finish withstands temperatures up to 1200º and is available in gloss black, gray or bronze.

POWDER COAT PANAMA

Panama's first and premier Powder Coating and Restoration Lab. We strive on providing our clients with the best possible quality on every job. Our services include Media Blasting, Parts Restoration and the best Powder Coating in the region with an array of quality colors, textures and finishes to choose from. All our equipment is par with U.S. standards. We use only the finest media and powders in the industry to produce the finest results. Our lab is catered for jobs ranging from small parts such as bolts and brackets, to considerable size jobs such as engine blocks and bike frames.

What is Powder Coating?

Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint.

Advantages of Powder Coating

· High Impact Resistance

· Eliminates chipping or scratching

· Longer life than paint

· Flexibility - can bend without cracking

· Uniform control of finish

· No sags or runs

· Mil thickness of 1 to 3

· Powder finishes are more durable than wet paint

· Color / Texture Variety

· Standard or Custom Colors

· Metallic finishes

· Clear coating and glosses

· Various textures - smooth, wrinkled, matte, and rough

· Durability

· Resistant to heat, corrosion, impact, and abrasion

· Resistant to most chemicals and solvents

· Resistant to fading from sunlight

· Resistant to scratching, peeling, and cracking

· Environmentally Friendly

· E.P.A. approved

· Creates no hazardous or toxic waste

· Uses no solvents or thinners

· Pollution free

Most Common Applications

Any objects made from metal (aluminum, steel, brass, copper, bronze, titanium, magnesium, etc.) can be powder coated. All of these metals, weather sand, die, investment casting, extruded, forged, and of course billet metals can be powder coated. Low density cast parts may require additional handling and possibly surface restoration by the experienced technicians at NQF. 

Some of the items that we powder coat include: patio and indoor furniture, decorative architectural pieces, car, boat, plane, bicycle and motorcycle parts (including chassis, frames and exhaust systems), birdcages, wheels, plumbing and lighting fixtures, metal cabinetry (i.e. medicine cabinets, etc), appliances (front and side panels of ranges and refrigerators, washer tops and lids, dryer drums, air conditioner cabinets, water heaters, dishwasher racks, cavities of microwave ovens), and more much more!

Media Blasting

Preparation of your parts is essential before coating them, that's where Media Blasting comes in on every job we do to assure you get the best results. Media Blasting ‘etches’ the surface of the metal, creating a solid mechanical bond adhesion during the curing process. It also cleanses the metal. We use very fine angular media because it gives the best results for powder coating adhesion. We also use Glass Bead Media, especially for aluminum to reflects the light to your eyes better, and make teh metal appear whiter or brighter.