Primary, Cam and Transmission Covers for a Harley '10 Road King. These where originally chromed - we blasted the first Layer off and then coated them with Wrinkle Black - it is almost an exact match to the original HD Wrinkle finish.

This Swing Arm is for a Custom Softail being built by Panama Chop. Gloss Black finish with a Zinc Powder base. Check out the mask job.

Fine Black Texture on Derby and Inspection Covers for a 2011 HD Sportster Forty Eight.

These bases where built by KC Design for the new Trump Ocean Club in Panama City. The specs from headquarters in the US called for Gray Texture powder coat finish - NQF took care it. The bases are for planters made out of teak - the will be place at the entrance of the Club. We are very pleased and honored to have been part of this amazing project. 

According to Panama's top motorcycle mechanic Toño Cabassa, these motor covers on all Gold Wings tend to take quite the beating from rock and debris. This one came off his personal bike - the paint was all chipped off giving way for some baby pitting. After NQF restoration this is the final result on Gloss Black. Guaranteed to withstand what's coming - again, better than factory.

Completely restored GE Breaker Panel Doors. These came from a house in the Mountains of Cerro Azul where the corrosion factor is as high as it gets - the panels where completely rusted out. First they where given a good blast, then coated with zinc primer powder and finished off with gray texture powder... they now look like new and a have a much superior finish than the factory finish.

Flawless Low Gloss Black on a Harley Dyna Fat Bob front fender.

These are Tito Richa's restored lamp rings and knobs for his Tacoma Desert Runner on Wet Black finish.

These are Kyle's pipes for his CJ Jeep build. We had previously coated them on High Heat black but they had to do some work on them (cutting, welding, etc...) they where brought back and this time we finished them in Wet Black - you can actually see your reflection on them.

This is the Harley Peanut tank we did for Urraca Ksutoms' FUSSER Project. First we media blasted the tank, then we did a layer of super glossy clear powder - the graphics were added and then a second layer of powder. The blasted metal gives a reflectiveness similar to flake finishes.

Harley lamp visor, rings and carburator cover for FUSSER project.

Set of Shimano bike parts fro Andrew Huzzard on Satin Black.

Juan Cambefort's Pulley coated and assembled on his finished wheel... complete job.

This is a completely restored ATV axle with components. Epoxy base powder and finished off with satin black.

These are Juan Cambefort's finished wheels... I must say, he now has the nicest set of spoke wheels in the Republic... the process of coating, even the spokes, was intricate, but the result is priceless.

Set of ATV swing arms totally restored using an Epoxy Powder Base and later coated with Sating Black. The Expoxy Powder Base will give these swing arms extra tough protection against the harsh enviroment and wear & tear of the Pearl Islands.

Set of wheels for Urraca Kustoms latest project: The FUSSER Sporty owned by Juan Cambefort. These wheels where meticulously taken apart, prepped and coated. This photo is mid-process; the hubs, front rim and spokes have already been coated & bearings installed back on. The rear rim in the back has been stripped clean and ready for powder. The tape and rubber caps are for protecting the coating during assembly. That's how we roll at NQF. Quality #1. I will be posting photos of the wheels completely assembled soon.

We restored several parts on Bandido Darrell's Dyna - Handlebars, Bottom Risers, Pinch Bolts, Riser Bolts, Steering Bolt Cover, Tripple Trees, Lower Legs and Brackets... everything came out looking like new.

Got Bars? here's some Harley mini apes we did for Bandido Darrell and a set of Custom Bars for the Smokin' Gun Project at UK on Semi Gloss Black.

Restored Harley foot controls for a Dyna Fat Bob at Monster Cycles - thanx for the business fellas!

Hornny Exhaust for Kyle's new Jeep build. These where done in High temperature Black to withstand the blasts from the 302 V8 little monster... they came out absolutely beautiful.

This is a manifold for a Yanmar marine engine... if you are into boats you have seen this part before and know how fast it rusts... Not anymore! We did this on Hight Temperature Black.

These are some old school pegs that have been totally restored and are going on a '78 harley shovelhead 80ci.

Mirror end caps for Abel Herrera's Harley Cross Bones.

Cowl and headlight trim for UK's '78 Shovelhead coated on Fine Texture Black - this finish is amazing, the photos don't do it justice.

Completely restored clutch clamp for the Smokin' Gun Project ('08 Harley Fat Bob) at Urraca Kustoms - u don't need to buy it new, just bring it to us.

Velocity stack, breathers and shock end caps on semi gloss black for the Smokin' Gun project ('08 Harley Fat Bob) at Urraca Kustoms.

Fresh batch of risers for a Harley Road King on Glossy Black - For Tito Rodriguez from Panama Chop.

Levers and covers on Transluscent Violet - lever clamps on Semi Gloss Black for Giancarlo Thompson.

Outriggers for a 40' sport yacht - Anodize Red - blast, prep, coat.

Kicker for a Custom Rat Bike at Monster Cycle on Transluscent Violet.

The main purpose of this blog is to provide our clients with the most information possible on the work that we do. We will be posting shots daily on our latest jobs and new product arrivals. Here's some parts we did for an '08 Harley Dyna Fat Bob.